EVS XSense Version 11.02 - July 2013 Operating Manual - Manual (Page 177)

8.9. Disconnecting from XNet
When you work on the XNet Network and exit Multicam, the system checks if other
systems are still connected to your server.
If this is the case, the following message appears:
Other users are connected to your LSM
on XNet network. Are you really sure
that you want to close the Multicam
application ?
[ESC]=CANCEL [ENTER]=YES
• Press ESC to cancel the command and return to the application.
• Press ENTER to exit the Multicam application.
OPERATION MANUAL XSense 11.02
8. Operation on XNet Network 169