EVS IPDirector Version 5.9 - January 2011 Part 8 User’s Manual - Manual (Page 96)

Issue 5.9.B IPDirector Version 5.9 – User Manual – Part 8: Editing - IPEdit
EVS Broadcast Equipment - January 2011
82
S
ELECTION
B
ASED ON THE
R
ECORDED
C
AMERA
A
NGLE
The Select Camera command available when you right-click in a timeline allows
you to select the timeline elements recorded on the camera you will choose from
the list displayed in the contextual menu:
This selection is used in combination with the Replace by command to replace all
selected clips by another camera angle.
The selection based on the recorded camera angle is done according to the
following rules:
• Only elements on the activated A/V tracks will be selected.
• Only elements recorded on the selected camera will be selected.
• If mark IN and mark OUT points are defined, only relevant elements between
the marks are taken into account for the selection.
• If no mark IN/OUT are defined, all relevant elements on the selected tracks are
taken into account for the selection.