EVS IPDirector Version 5.9 - January 2011 Part 8 User’s Manual - Manual (Page 134)

Issue 5.9.B IPDirector Version 5.9 – User Manual – Part 8: Editing - IPEdit
EVS Broadcast Equipment - January 2011
120
4.9.2 O
VERVIEW OF
T
RIM
M
ODES AND
T
RIM
A
CTIONS
The following table gives an overview of the possible trim actions. You can find
more detailed information on trim actions in the Section 4.9.4 ‘Possible Trim
Actions’, on page 124 :
Trim Action Description
Trim Left & Right
- Roll mode:
The transition between both elements in trim mode is
moved left or right within each element but the overall
length of both elements is preserved:
• The duration of each individual element is modified.
• One element is extended, one element is trimmed.
Trim Left Insert
- Ripple A mode:
The OUT transition of the element in trim mode is moved
to the right or to the left:
• The element is extended or trimmed around its OUT
point.
• This does not impact the next element in the timeline.
Trim Left Overwrite
- Ripple A mode:
The OUT transition of the element in trim mode is moved
to the right or to the left:
• The element is extended or trimmed around its OUT
point.
• If the element is trimmed, a blank element is added
after it.
• If the element is extended, the following element is
trimmed at its IN point.
Trim Right Insert
- Ripple B mode: The IN transition of the element in trim mode is moved to
the right or to the left:
• The element is extended or trimmed around its IN
point.
• This does not impact the previous element in the
timeline.
Trim Right Overwrite
- Ripple B mode:
The IN transition of the element in trim mode is moved to
the right or to the left:
• The element is extended or trimmed around its IN
point.
• If the element is trimmed, a blank element is added
before it.
• If the element is extended, the previous element is
trimmed at its OUT point.