EVS IPDirector Version 5.9 - January 2011 Part 8 User’s Manual - Manual (Page 223)

IPDirector Version 5.9 – User Manual – Part 8: Editing - IPEdit
EVS Broadcast Equipment – January 2011
Issue 5.9.B
209
H
OW TO
M
ODIFY A
C
LIP
GPI
To modify a GPI defined on an element of the timeline, proceed as follows:
1. Select the Clip GPI with the lasso as described above in this section. The
GPI marker is displayed with a white border.
2. Right-click on the GPI and select Modify GPI from the contextual menu.
The Modify GPI OUT dialog box opens.
3. Modify the requested settings in the Modify GPI Out window.
4. Click Apply.
The settings of the clip GPI have been modified. The new GPI settings will display
after one second when you position the mouse cursor on the GPI marker.
H
OW TO
D
ELETE A
C
LIP
GPI
1. Select the Clip GPI with the lasso as described above in this section. The
GPI marker is displayed with a white border.
2. Right-click on the GPI and select Delete GPI from the contextual menu.
The following warning message is displayed:
3. Click Yes to confirm that you want to delete the clip GPI.
The clip GPI marker has been removed from the Timecode bar.