EVS IPDirector Version 5.9 - January 2011 Part 8 User’s Manual - Manual (Page 174)

Issue 5.9.B IPDirector Version 5.9 – User Manual – Part 8: Editing - IPEdit
EVS Broadcast Equipment - January 2011
160
H
OW TO
A
DD
E
FFECTS
T
O
C
ONTIGUOUS
E
LEMENTS
To add transition effects manually to contiguous elements in the timeline, proceed
as follows:
1. Place a mark IN and mark OUT to cover the transitions on which an effect
needs to be defined. For example:
2.
Click the Add Fx button to open the Add Transition Effect window.
3. In the Tracks group box, click the tracks on which transition effects should
be added. For example:
4. In the Transition Effect group box, modify the default settings for the effect
type, duration and position, if needed. For example:
5. In the Video Transition GPI, specify a Start transition GPI and an End
transition GPI, if requested. For example, no GPIs are defined.
6. Tick the check box Apply to all transitions between mark in and mark out.
7. If you want to overwrite any transition effect that may have been previously
defined on the selected transitions, tick the check box Overwrite existing
transition effects.