EVS IPDirector Version 5.9 - January 2011 Part 8 User’s Manual - Manual (Page 34)

Issue 5.9.B IPDirector Version 5.9 – User Manual – Part 8: Editing - IPEdit
EVS Broadcast Equipment - January 2011
20
Play/Pause IN/OUT Point Position
Indicator
Duration
Value
Colour
Play/Pause Only OUT
defined Before OUT
point Duration to
OUT point Yellow
Play/Pause Only OUT
defined After OUT
point Duration from
OUT point Grey
Play/Pause IN and OUT
defined Before IN point Duration to IN
point
Grey
Pause IN and OUT
defined Between IN
and OUT point Duration
between IN
and OUT
points Yellow
Play IN and OUT
defined
Between IN
and OUT point
Countdown to
OUT point
Yellow
Play/Pause IN and OUT
defined
After OUT
point
Duration from
OUT point
Grey
3.5.7 J
OG
B
AR
When a clip is loaded, the jog bar shows the duration of the clip. Moreover, it
displays the following information:
• The white section represents the length of the trimmed clip, i.e. between the IN
point and the OUT point that have been defined.
• The yellow sections represent the guardbands before the IN point and after the
OUT point.
• The blue position indicator shows the actual relative position in the clip. The
position indicator can be moved with the mouse in the clip to play it from any
position.
• If the editor adds a new mark IN point on the jog bar, a green position indicator
will be added to mark this position.
• If the editor adds a new mark OUT point on the jog bar, a red position indicator
will be added to mark this position.
When a local train is loaded, the guardbands are not displayed.
When a distant train is loaded, the train boundaries are not available. In this case,
the jog bar is dimmed and unavailable.