EVS IPDirector Version 5.9 - January 2011 Part 8 User’s Manual - Manual (Page 131)

IPDirector Version 5.9 – User Manual – Part 8: Editing - IPEdit
EVS Broadcast Equipment – January 2011
Issue 5.9.B
117
4.8.7 H
OW TO
E
XTEND
OUT
OR
E
XTEND
OUT S
LOW
/F
AST A
T
IMELINE
E
LEMENT
To extend the mark OUT point of a timeline element, perform as follows:
1. With the Timeline Track Selection buttons, select the tracks to be taken
into account in the Extend action.
2.
Select the Insert or Overwrite mode to be applied in the extend
action by clicking the Insert/Overwrite Global Mode button.
3.
In the timeline loaded, click to add a mark OUT point after the
transition of the elements whose OUT point you want to extend.
Define precisely the position of the mark OUT point: IPEdit will indeed
calculate the duration of the extend based on the duration between:
• the transition of the element to extend
and
• the mark OUT point added.
4. Do one of the following:
• Click the Extend button to perform the Extend action.
• Click the Extend Slow/Fast Button to perform the Extend
Slow/Fast action.
The Extend or the Extend Slow/Fast action is performed according to the defined
settings:
• on the selected tracks
• in the selected Insert or Overwrite mode
• on the elements before which the mark OUT point has been added
• with the duration between the element transition and the mark OUT point.
Note
When you place a mark IN and mark OUT before using the Extend
function, IPEdit will ask you which extend action you want to perform.