beautypg.com

6 how to slip an element by setting a new timecode, How to slip an element by setting a new timecode, Ow to – EVS IPDirector Version 5.9 - January 2011 Part 8 User’s Manual User Manual

Page 154: Lip an, Lement by, Etting a, Imecode

background image

Issue 5.9.B

IPDirector Version 5.9 – User Manual – Part 8: Editing - IPEdit

EVS Broadcast Equipment - January 2011

140

4.10.6 H

OW TO

S

LIP AN

E

LEMENT BY

S

ETTING A

N

EW

T

IMECODE

You can slip one or more element(s) by redefining either the TC IN or TC OUT. If
several elements are selected, they must belong to the same source media and
have the same TC IN and OUT.
To slip an element by modifying the timecode, proceed as follows:

1.

Select one or more elements of the same source media.

2.

Right-click on the selected elements and select Set Timecode from the
contextual menu.

The Slip Timecode dialog box opens:

3.

Enter the new requested TC IN or TC OUT and click ENTER to validate the

new TC value.

4.

Click Apply.

The TC IN and TC OUT of the selected elements have been modified according to
the new TC information entered.

If the new timecode defined is not available in the record train, an error message
will be displayed.