EVS IPDirector Version 5.9 - January 2011 Part 8 User’s Manual - Manual (Page 168)

Issue 5.9.B IPDirector Version 5.9 – User Manual – Part 8: Editing - IPEdit
EVS Broadcast Equipment - January 2011
154
T
RANSITION
E
FFECT
G
ROUP
B
OX
Default Settings and Settings Defined in this Group Box
You can define default settings for the transition effects applied manually via the
Add/Modify Transition Effect window. These settings are defined in the Tools >
Settings menu, in the category IPEdit > General, Transition Effects group box,
‘Manual’ mode.
In the Transition Effect group box of the Add/Modify Transition Effect window, you
can modify these default settings by specifying another type, duration and/or
position for the transition effects to be added:
When you first access the window in a session, the default value defined in the
Timeline settings is displayed. Then, the last value used is restored each time you
open the window.
Field Description
The following table provides a short description of the fields:
Field Description
Type Effect type that will be applied to the selected transitions.
The possible values are:
• Cut
• Mix
• Wipe
If you select ‘wipe’, you need to select the kind of wipe you
want to perform in the drop-down list:
• Wipe L Î R: wipe from left to right
• Wipe R Î L: wipe from right to left
• Wipe U Î D: wipe from top to bottom
• Wipe D Î U: wipe from bottom to top.
When the ‘wipe’ effect is defined, it is applied to the video track
and a ‘mix’ is automatically defined on the selected audio
tracks.