EVS IPDirector Version 5.9 - January 2011 Part 8 User’s Manual - Manual (Page 136)

Issue 5.9.B IPDirector Version 5.9 – User Manual – Part 8: Editing - IPEdit
EVS Broadcast Equipment - January 2011
122
With the ShuttlePRO
To enter the trim mode with the ShuttlePRO, proceed as follows:
1. Position the nowline next to the transition on which you want to activate the
trim mode.
2. Select the Track Selection buttons of the tracks on which you want to
activate the trim mode.
3.
Press the ShuttlePRO key to activate the trim mode.
The trim mode is activated on the nearest transition for the selected tracks and is
in roll mode by default.
H
OW TO
E
XCLUDE OR
I
NCLUDE
T
RACKS
When the trim mode is active for at least one of the tracks of the timeline, you can
include or exclude tracks by clicking the corresponding Track Selection button on
the Timeline pane.
H
OW TO
C
HANGE THE
T
RIM
M
ODE
By default, the trim mode is activated in roll mode. To change the trim mode on
the user interface via the keyboard, refer to the following table:
To activate the … In the user interface, … On the keyboard, …
Trim Left mode
(Ripple A) Click next to the transition
on the left element: Press P.
Î The yellow vertical bar is displayed on the left element and
the Trim Left mode is active.