EVS IPDirector Version 5.9 - January 2011 Part 8 User’s Manual - Manual (Page 85)

IPDirector Version 5.9 – User Manual – Part 8: Editing - IPEdit
EVS Broadcast Equipment – January 2011
Issue 5.9.B
71
T
RANSFER
T
YPES
There are different ways to transfer a timeline to a target or nearline. This is set
in the target or nearline definition in the Remote Installer, and cannot be modified
in IPDirector.
The possible transfer types are briefly described below. All transfer types are
possible with nearlines. However, the supported transfer types to a target depend
on the target itself.
Transfer Type Description
EDL and clips EDL file (XML format) that describes the timeline.
and
backup of each clip used in the timeline.
EDL and flatten file EDL file (XML format) that describes the timeline.
and
Consolidated file that represents the A/V result of the
timeline, with the defined A/V effects.
EDL only EDL file (XML format) that describes the timeline.
Flatten file only Consolidated file that represents the A/V result of the
timeline, with the defined A/V effects.
H
OW TO
S
END A
T
IMELINE TO A
T
ARGET
, B
IN OR
N
EARLINE
To send a timeline open in IPEdit to the default bin, a target or an on-line
nearline, proceed as follows:
1. In the Timeline area, right-click the Timeline Name field.
The Timeline contextual menu is displayed.
2. Do one of the following:
• To send to the default bin or to an available destination target, select
Send to and the requested destination.
• To send to an on-line nearline folder, select Back up to Nearline and the
requested nearline folder.
The timeline is sent to the requested destination.