7 timecode and duration fields, Mark in tc, Mark out tc – EVS IPDirector Version 5.9 - January 2011 Part 8 User’s Manual User Manual
Page 67: Duration between mark in and mark out, Nowline tc, Timeline duration, Timecode and duration fields
IPDirector Version 5.9 – User Manual – Part 8: Editing - IPEdit
EVS Broadcast Equipment – January 2011
Issue 5.9.B
53
4.1.7 T
IMECODE AND
D
URATION
F
IELDS
The timecode fields displayed in the Timeline pane are shortly described below:
M
ARK
IN
TC
The Mark IN TC field displays the timecode of the mark IN position on the
timeline, if any mark IN point is defined.
If you want to position the mark IN point on a given TC of the timeline, type this
timecode in the Mark IN TC field and press ENTER.
M
ARK
OUT
TC
The Mark OUT TC field displays the timecode of the mark OUT position on the
timeline, if any mark OUT point is defined.
If you want to position the mark OUT point on a given TC of the timeline, type this
timecode in the Mark OUT TC field and press ENTER.
D
URATION BETWEEN
M
ARK
IN
AND
M
ARK
OUT
The middle field displays the duration between the mark IN and mark OUT points
defined on the timeline. It is not editable.
N
OWLINE
TC
The Nowline TC field displays the timecode of the nowline position on the
timeline. If you want to position the nowline to a given TC of the timeline, type this
timecode in the Nowline TC field, press ENTER.
T
IMELINE
D
URATION
The Timeline Duration field displays the effective duration of the timeline loaded,
calculated from the start of the first element to the end of the last element.