EVS IPDirector Version 5.9 - January 2011 Part 8 User’s Manual - Manual (Page 200)

Issue 5.9.B IPDirector Version 5.9 – User Manual – Part 8: Editing - IPEdit
EVS Broadcast Equipment - January 2011
186
4.14.9 M
ODIFYING THE
V
OLUME
O
N A
G
IVEN
P
OSITION OF A
T
RACK
To modify the volume on a given point of a track, proceed as follows:
1. On the Volume Automation panel, double-click the position where you want
to add a volume automation point.
The point is added.
2. If you need to adjust the volume or the position of the point, select it again
and drag it up or down, right or left according to your needs.
The decibel increase or decrease compared to the 0 db line is specified as
you move the volume automation point.
3. When the volume automation point is correctly positioned, release the
mouse.
E
XAMPLE
: A
DD A
V
OLUME
A
UTOMATION
P
OINT
Before
During