EVS IPDirector Version 5.9 - January 2011 Part 8 User’s Manual - Manual (Page 189)

IPDirector Version 5.9 – User Manual – Part 8: Editing - IPEdit
EVS Broadcast Equipment – January 2011
Issue 5.9.B
175
This is symbolized with the global swap icon or the mute icon displayed
on the element in the general display of the timeline.
The swaps and mutes can be viewed on the Swap/Mute Zoom display:
H
OW TO
A
DD A
S
WAP OR
M
UTE
F
ROM AND TO
G
IVEN
P
OINTS
OF A
T
RACK
To add an audio swap or mute from and to given points of an audio track, proceed
as follows:
1.
In the general timeline display, click the Swap/Mute Zoom button on the
right of the track on which to add the swap or mute.
The track is displayed in Swap/Mute Zoom mode.
2. Do one of the following to specify the start and end point of the swap:
• Place a mark IN at the start point and a mark OUT at the end point.
• Place the nowline at the start point if you want the end point to be the end
of the element.
3. Right-click after the nowline or between the mark IN and mark OUT points
and select Add Swap/Mute.
The Swap/Mute Configuration window opens: