EVS IPDirector Version 5.9 - January 2011 Part 8 User’s Manual - Manual (Page 52)

Issue 5.9.B IPDirector Version 5.9 – User Manual – Part 8: Editing - IPEdit
EVS Broadcast Equipment - January 2011
38
T
IMECODE
B
AR
It displays a graduation of the timecode in the timeline. The timecode of the
timeline track starts with the timecode defined in the Control Track Initial
Timecode setting. To modify this setting, go to the menu Tools > Settings, in the
category IPEdit > General.
The most precise graduation is a graduation by frame, i.e. from frame 0 to 24 in
PAL and from frame 0 to 29 in NTSC.
N
OWLINE
The nowline is the blue vertical line that displays the current position on the
timeline. It is used to browse in the timeline or mark an insertion position.
In the following cases, the nowline in the timeline will act as a mark IN or mark
OUT when performing editing actions:
Mark IN or OUT
defined? Nowline position? The nowline acts as a …
Mark IN defined After the mark IN Mark OUT
Mark OUT defined Before the mark OUT Mark IN
M
ARK
IN /OUT P
OINTS
The mark IN point is a green vertical line on the timeline that displays the position
of a mark IN point.
The mark OUT point is a red vertical line on the timeline that displays the position
of a mark OUT point.
You will add mark IN and mark OUT points to help you place media in the timeline.