EVS IPDirector Version 5.9 - January 2011 Part 8 User’s Manual - Manual (Page 201)

IPDirector Version 5.9 – User Manual – Part 8: Editing - IPEdit
EVS Broadcast Equipment – January 2011
Issue 5.9.B
187
After
4.14.10 R
ESETTING THE
V
OLUME
H
OW TO
R
ESET THE
V
OLUME ON AN
T
RACK
To reset the volume on the whole track loaded, proceed as follows:
• In the Volume Automation panel, right-click and select Reset track automation
volume.
The volume of the whole track is reset to its initial volume.
H
OW TO
R
ESET THE
V
OLUME ON A
P
ART OF A
T
RACK
To reset the volume on a part of the track loaded, proceed as follows:
1. In the Volume Automation panel, delimit the part of the track on which you
want to reset the volume as follows:
a. Add a mark IN point at the position to start the volume reset.
b. Add a mark OUT point at the position to stop the volume reset.
2. Right-click and select Reset automation volume.
The volume of the selected part of the track is reset to its initial volume.
H
OW TO
R
ESET THE
V
OLUME ON AN
A
UDIO
E
LEMENT
To reset the volume on an element of the loaded track, proceed as follows:
1. In the Volume Automation panel, position the mouse cursor on the element
for which you want to reset the volume.
2. Right-click and select Reset clip automation volume.
The volume of the audio element on the loaded track is reset to its initial volume.