EVS IPDirector Version 5.9 - January 2011 Part 8 User’s Manual - Manual (Page 33)

IPDirector Version 5.9 – User Manual – Part 8: Editing - IPEdit
EVS Broadcast Equipment – January 2011
Issue 5.9.B
19
• the defined (mark) IN and (mark) OUT points:
o
When no new mark IN and mark OUT have been defined after the clip has
been loaded, the values displayed in the Duration field are based on the
original IN and OUT points of the clip.
o
When a new mark IN and/or mark OUT have been defined after the clip has
been loaded, the values displayed in the Duration field will be based on
this new mark IN and/or mark OUT point(s).
Play/Pause Position Indicator Duration Value Colour
Pause On or between IN and
OUT points Duration to the OUT
point Yellow
Play On or between IN and
OUT points Countdown to OUT point Yellow
Pause Before IN point Duration to the IN point Grey
Play Before IN point Count down of remaining
time to OUT point Grey
Pause After OUT point Duration from the OUT
point Grey
Play After OUT point Count down of remaining
time to end of guardband Grey
W
HEN A
R
ECORD
T
RAIN IS
L
OADED
The following table shows the possible colors and values of the right Duration
field when a train is loaded.
The right Duration field value and color depends on:
• whether the clip is playing or paused
• whether an IN and/or OUT points are defined
• the media position indicator.
Play/Pause IN/OUT Point Position
Indicator
Duration
Value Colour
Play/Pause No IN, no OUT On current
timecode Recording
capacity left on
the train
Blue
Play/Pause No IN, no OUT Before current
timecode
Delay time
from current
timecode
Yellow
Play/Pause Only IN defined Before IN point Duration to IN
point
Grey
Play/Pause Only IN defined After IN point Duration from
IN point Yellow