EVS IPDirector Version 5.9 - January 2011 Part 8 User’s Manual - Manual (Page 107)

IPDirector Version 5.9 – User Manual – Part 8: Editing - IPEdit
EVS Broadcast Equipment – January 2011
Issue 5.9.B
93
3. In the Player pane, load the requested media and select the tracks to be
taken into account when you will add the media.
4. If you want to define a new mark IN and mark OUT points in the Player, do
the following in the Player:
a. Browse to the requested position.
b. Click the mark IN button and/or mark OUT button .
5. Drag the loaded media from the Player pane to the requested position in the
timeline.
The media is added to the timeline based on the Insert/Overwrite mode selected in
the timeline.
D
RAG
M
EDIA FROM THE
B
ROWSER IN THE
T
IMELINE
To add media to a timeline by dragging it from the Browser to the timeline,
proceed as follows:
1. In the Timeline pane, select the Insertion mode with the Insert/Overwrite
Toggle button in the Edit Command bar.
2. In the loaded timeline, do one of the following to define the insertion
position if you do not want to add the media on an element transition:
• Position the nowline
• Add a mark IN or mark OUT point on the requested insertion position.
3. In the Browser pane, select the media to add and drag it to the requested
position in the timeline.
The media is added to the timeline from the mark IN to the mark OUT points based
on the Insert/Overwrite mode selected in the timeline.
D
RAGGING
M
EDIA
F
ROM OTHER
IPD
IRECTOR
M
ODULES
You can also drag media from the following IPDirector modules directly to the
timeline:
• the Database Explorer.
• the History list of a Control Panel
• the Last Created Clips of a Control Panel
Proceed in the same way as when you drag media from the Browser.