EVS IPDirector Version 5.8 - July 2010 Part 6 User's Manual - Manual (Page 87)

Issue 5.8.B IPDirector Version 5.8 – User Manual – Part 6: Playout – Playlist Panel
EVS Broadcast Equipment – July 2010
76
4. Do one of the following:
• Choose the desired speed from the list of preset values
OR
• Select Custom speed from the contextual menu and enter an exact speed
value in the popup window which is displayed:
The selected speed value appears in the Speed column of the playlist grid.
Note
If an unknown speed is allocated to one playlist element, it will be
played out at the speed defined on the channel when the element comes
to air, for example the speed at which the previous element on-air played
at.
H
OW TO
S
ET
S
PEED BY
D
IRECT
E
NTRY IN THE
P
LAYLIST
G
RID
To define speed by direct entry in the playlist grid, proceed as follows:
1. Select one element in the playlist and make sure that the Speed column is
visible in the grid.
2. To define the playout speed of the element, modify the value by direct entry
in the Speed column. A value as a percentage between 0 and 400% can be
entered.
If the ESC key is used on the keyboard, the editable area is exited and the
original cell value is restored.
If the ENTER key is pressed or a different area is clicked on, the
modifications will be validated.
The selected speed value appears in the Speed column of the playlist grid.