EVS IPDirector Version 5.8 - July 2010 Part 6 User's Manual - Manual (Page 168)

IPDirector Version 5.8 – User Manual – Part 6: Playout – Playlist Panel
EVS Broadcast Equipment – July 2010
Issue 5.8.B
157
Adding Elements in a Fill or a Key Playlist
Adding an element by drag-and-drop operation into a Fill (or Key) playlist can be
done in the same way as for adding a Normal element into a Normal playlist. Refer
to section ‘How to Insert an Element by a Drag-and-Drop Operation into the
Playlist Grid’ on page 54.
However, the system will behave differently depending on the type of the element
added and the type of the playlist. The table below summarizes the actions
resulting from the insertion of an element into a playlist:
Element
Type
Playlist Type
Fill Key
Normal 1. Element inserted in Fill PL.
2.Black or white element of
exact same duration inserted in
corresponding Key PL: warning
message displayed. Error message: you can only insert
a Key element into a Key PL.
Fill If Fill element is not linked to a
Key element:
1. Element inserted in Fill PL.
2. Black or white element of
exact same duration inserted in
corresponding Key PL: warning
message displayed.
Error message: you can only insert
a Key element into a Key PL.
If Fill element is linked to a Key
element:
1. Fill element inserted in Fill
PL.
2. corresponding Key element
inserted in corresponding Key
PL.
Key Error message: you cannot insert
a Key element into a Fill PL If Key element is not linked to a
Fill element:
Key Element inserted in Key PL.
If Key element is linked to a Fill
element:
1. Key element inserted in Key PL.
2. corresponding Fill element
inserted in corresponding Fill PL.
Note
When a Key clip is linked to several Fill clips, it cannot be inserted into
a Key playlist. You should insert the Fill clip into the fill playlist to avoid
any confusion.