EVS IPDirector Version 5.8 - July 2010 Part 6 User's Manual - Manual (Page 147)

Issue 5.8.B IPDirector Version 5.8 – User Manual – Part 6: Playout – Playlist Panel
EVS Broadcast Equipment – July 2010
136
It is possible to define an auxiliary clip in the Playlist Panel. The audio track of
this auxiliary clip can be played instead of the audio track of the played clip. For
more information on the auxiliary track, refer to section 1.7.12 ‘Associating an
Auxiliary Audio Clip to a Playlist’ on page 105.
The Auxiliary Track Settings category allows the user to specify on which audio
output the audio track of the auxiliary clip should be played.
The Auxiliary Track Settings category will only be available if the EVS server is
configured in IPDP mode.
The EVS server column displays all the EVS servers available on the XNet
network. The settings for auxiliary track audio outputs are made for each EVS
server being controlled by IPDirector. Therefore the EVS server must be selected
from the list and then have the settings applied.
The auxiliary track output can be one of the following:
Output Description
On PRV audio output The audio track of the auxiliary clip will use the
audio outputs normally assigned to the PRV
player channel.
If no PRV channel is available, the auxiliary
track will not be assigned to any audio output.
On PRV and 7/8 – 15/16
outputs The audio track of the auxiliary clip will use the
audio outputs normally assigned to the PRV
channel, if any, plus all the audio outputs from
7-8/15-16 that have not yet been assigned to
another channel.
Use this option if you need an auxiliary track
without PRV channel available.
On PGM audio output The audio track of the auxiliary clip will use the
audio outputs normally assigned to the PGM
player channel.