EVS IPDirector Version 5.8 - July 2010 Part 6 User's Manual - Manual (Page 139)

Issue 5.8.B IPDirector Version 5.8 – User Manual – Part 6: Playout – Playlist Panel
EVS Broadcast Equipment – July 2010
128
Action Field
List with the kinds of actions which can be associated to a macro command:
All these actions are described here below.
Parameters
Displays different parameters depending on the type of macro command selected.
GPI: GPI number, type and pulse duration, the position the GPI is linked to and
the eventual delay or advance.
Mute On / Mute Off: the position the Mute tag is linked to and the duration value
for the audio mix transition effect.
Swap Audio: ‘Audio Sources’ -> ‘Outputs’, e.g. a1 -> a3.
Effect: video effect type and duration, audio effect type and duration.
Still/Start Mode: still mode option, start mode option.
A
CTION
= N
ONE
The corresponding macro command is reset and the parameters zone is cleared.
A
CTION
= GPI OUT
When an OUTPUT GPI action is applied to an element at a given timecode, the
action associated to this OUTPUT GPI is triggered at this timecode value.
Selecting GPI OUT action in the Playlist Macro Commands Settings displays the
Define GPI OUT Parameters window.