EVS IPDirector Version 5.8 - July 2010 Part 6 User's Manual - Manual (Page 151)

Issue 5.8.B IPDirector Version 5.8 – User Manual – Part 6: Playout – Playlist Panel
EVS Broadcast Equipment – July 2010
140
1.11 EVS SERVER CHANNEL ON-SCREEN
DISPLAY
The channel’s OSD will depend on the settings defined in the Tools > Settings >
Playlists > Playlist / OSD category. Refer to section 1.10.3 ‘OSD Settings’ on
page 137 for more information. The sections below give an indication on the place
where the information will be displayed on screen.
1.11.1 O
N
-S
CREEN
D
ISPLAY IN
P
LAYLIST
P
LAYOUT
M
ODE
If the playlist is being played out on the output of an EVS server channel the
channel’s OSD can show the following information:
PL11/03: PL is always displayed. 11/03 corresponds to the LSM ID
of the playlist loaded on the channel.
Nxt Brk 00:17:13: ‘Nxt Brk’ is always displayed. ‘00:17:13’ corresponds to
the remaining time till the next break in the playlist.
hh:mm:ss:ff On-air timecode
00:17:13 Remaining time till the next element starts.
Spd Current playout speed
111A Shows the LSM ID of the current element.
ClipName Name of the clip (truncated to 16 characters) if defined.
001/999 Element number in the playlist (e.g. 001) followed by the
number of elements in the playlist (E.G. 999).
A key is displayed if the channel is locked. No character is displayed if the
channel is not locked.
Note
When a virtual element is included in the playlist that is being played
out, the OSD on the preview channel will display the comment ‘not
available’ on a color clip (grey).
Post Roll
When a post-roll is activated, a ‘P’ is displayed.