Auxclip name area, Append zone, End cue area – EVS IPDirector Version 5.8 - July 2010 Part 6 User's Manual User Manual
Page 32

IPDirector Version 5.8 – User Manual – Part 6: Playout – Playlist Panel
EVS Broadcast Equipment – July 2010
Issue 5.8.B
21
A
UX
C
LIP
N
AME
A
REA
This area indicates whether an auxiliary audio clip is associated to the playlist or
not.
If an auxiliary clip is associated, the area displays the name and LSM ID of the
clip. The background of the zone is green.
If no auxiliary clip is associated, the area displays “No Auxiliary clip”. The
background of the zone is grey.
Refer to section 1.7.12 ‘Associating an Auxiliary Audio Clip to a Playlist’ on page
105 for more details on the AuxClip function.
A
PPEND
Z
ONE
The Append zone can be used to append elements such as clips, growing clips or
playlists to the playlist associated to the Playlist Panel. This is done by a drag-
and-drop operation from the Database Explorer.
This cannot be used to append timelines to a playlist.
E
ND
C
UE
A
REA
This END CUE area indicates whether the END CUE mode is activated or not.
The purpose of using the END CUE function is to trigger a countdown action in the
control room which indicates to the operator the end of a playlist is near.
If it is activated, the END CUE duration is displayed in the END CUE area and the
background of the zone is green.
If it is not activated, the area displays ‘END CUE OFF’ and the background of the
zone is grey.
Refer to section 1.7.13 ‘Working with End Cue’ on page 107 for more details on
the END CUE function.