EVS IPDirector Version 5.8 - July 2010 Part 6 User's Manual - Manual (Page 86)

IPDirector Version 5.8 – User Manual – Part 6: Playout – Playlist Panel
EVS Broadcast Equipment – July 2010
Issue 5.8.B
75
4. To define the duration of the video transition effect and the audio transition
effect, modify the value by direct entry in the Video Fx Dur. column or in the
Audio Fx Dur. column. A value in seconds and frames up to 1 minute can be
used. The same duration will automatically apply to both the audio and the
video transition effects.
If the ESC key is used on the keyboard, the editable area is exited and the
original cell value is restored.
If the ENTER key is pressed or a different area is clicked on, the
modifications will be validated.
The selected transition effects and corresponding durations appear in the Video
Effect, Audio Effect, Video Fx Dur and Audio Fx Dur. columns of the playlist grid.
1.7.3 S
ETTING THE
P
LAYOUT
S
PEED
The user can define a different playout speed for each element of a playlist.
Default values are defined in the Tools > Settings > Playlist > Playlist / Default
Transition category. Refer to section 1.9.3 ‘Default Transition Settings’ on page
123 for details on the settings options.
The speed can be set in two different ways:
• through the Playlist Element contextual menu
• by direct entry/selection in the playlist grid
H
OW TO
S
ET
S
PEED
U
SING THE
P
LAYLIST
E
LEMENT
C
ONTEXTUAL
M
ENU
To define playout speed using the Playlist Element contextual menu, proceed as
follows:
1. Select one or several elements in the playlist for which you want to defined
effects.
2. Right-click one of the elements.
The Playlist Element contextual menu opens.
3. Select Set Speed from the menu.
A sub-menu opens