EVS IPDirector Version 5.8 - July 2010 Part 6 User's Manual - Manual (Page 48)

IPDirector Version 5.8 – User Manual – Part 6: Playout – Playlist Panel
EVS Broadcast Equipment – July 2010
Issue 5.8.B
37
How to Cue up a Playlist to the Player Channel
When a playlist is loaded on a channel associated to a Playlist Panel, loading an
element type (clip, train, growing clip) on the same channel will unload the playlist
from the channel. However, it is still possible to load it again on the associated
player channel:
To cue up the playlist:
• Double-click the first element of the playlist in the Playlist Panel
OR
• Press the RECUE button or on the keyboard
The playlist will then be loaded on the first frame of the first element.
To cue up one element of the playlist:
• double-click it on the Playlist Panel
The corresponding element will then be loaded. The playlist will cue up on the first
frame of that element.
Loading a Playlist Element onto the Control Panel
It is possible to load a playlist element onto the Control Panel. See the
corresponding section in Control Panel chapter in part 5 of the manual.
1.5.5 M
OVING WITHIN A
P
LAYLIST
E
LEMENT
Two options enable the users to define a point in time where they want the system
to jump to, within a playlist element. This permits the review of a specific part of a
subject before it is played out.
H
OW TO
J
UMP TO A
R
EMAINING
T
IME
V
ALUE
From the Time until Transition field, it is possible to perform a jump to a defined
time before the OUT point of a selected element. To do so, proceed as follows:
1. Select a playlist element.
2. Click in the Time Until Transition field
OR
press key.
The value displayed is ’00:00:00:00’.