EVS IPDirector Version 5.8 - July 2010 Part 6 User's Manual - Manual (Page 49)

Issue 5.8.B IPDirector Version 5.8 – User Manual – Part 6: Playout – Playlist Panel
EVS Broadcast Equipment – July 2010
38
3. Enter the remaining time duration, corresponding to the point you want the
system jumps to.
4. Press ENTER.
The system jumps to the timecode corresponding to the remaining time duration
before the OUT point.
H
OW TO
J
UMP TO AN
E
LEMENT
T
IMECODE
To jump to a specific timecode within an element, proceed as follows:
1. Select a playlist element.
2.
Click in the GoTo Element Timecode button
OR
press key.
The GoTo Element Timecode zone is displayed.
3. Enter the timecode value, corresponding to the point you want the system
jumps to.
4. Press ENTER.
The system jumps to the defined timecode of the selected element.
1.5.6 M
ODIFYING
P
LAYLIST
I
NFORMATION
V
ARIOUS
O
PTIONS
Modifying playlist information, such as name, tape ID, keywords, playlist type,
sent to destinations, published to groups, metadata, is allowed either in the
Playlist Panel, in the Clip-List tab of the Control Panel or in the Playlist tree view
of the Database Explorer.
To modify playlist information via the Control Panel, refer to the section ‘Modifying
Media Information’ of the Control Panel chapter in part 5 of the user manual.
To modify playlist information via the Database Explorer, refer to the section
Playlist Contextual Menu of the Database Explorer chapter in part 3 of the user
manual.