EVS IPDirector Version 5.8 - July 2010 Part 6 User's Manual - Manual (Page 23)

Issue 5.8.B IPDirector Version 5.8 – User Manual – Part 6: Playout – Playlist Panel
EVS Broadcast Equipment – July 2010
12
GoTo an Element Button
or
The GoTo an Element button is a quick way to exit a partial loop.
The Exit Loop mode is selected through the button contextual menu, obtained with
a right-click:
The selected option is displayed just under the button: ASAP or OUT.
When elements are played within a loop and the operator presses the GOTO
Element button or the corresponding keyboard shortcut, the system jumps on the
selected element in the playlist, according to the selected Exit Loop mode, i.e. as
soon as possible or when the OUT point of the current element is reached.
LOOP Button
Changes to OR
When the operator clicks on the LOOP button, the playlist will loop when it
reaches its end. To deselect LOOP, click on the LOOP button again.
When playlists are played on ganged player channels while the loop mode is
enabled, each playlist is played individually to its end before it is looped.
Go to Element Timecode Button
OR
Clicking this button displays or hides the Go To Timecode zone.
The user may enter a timecode between the TC IN and TC OUT of the selected
clip element and the system will cue to the timecode inside the element.