EVS IPDirector Version 5.8 - July 2010 Part 6 User's Manual - Manual (Page 75)

Issue 5.8.B IPDirector Version 5.8 – User Manual – Part 6: Playout – Playlist Panel
EVS Broadcast Equipment – July 2010
64
The element(s) will be removed from the playlist unless the playlist is on air.
Note
If a group is part of the selection or if the group title line is selected, all
the elements of the group will be removed. A playlist inserted in another
playlist behaves as a group.
Important
If a clip is present in a playlist and you delete it from the Database
Exlorer, using the Delete option, the corresponding playlist element
• will be deleted as well if the playlist is on-line
• will be replaced by a virtual element if the playlist is off-line and no
corresponding clip element is still present
• will be replaced by the file corresponding to the deleted XT clip if the
playlist is off-line and a file is still present.
For a comprehensive description of the Delete Clip option, refer to
section ‘Deleting a Clip’ in part 3 ‘Browsing’ of the user manual.
1.6.6 M
ODIFYING A
P
LAYLIST
E
LEMENT
H
OW TO
T
RIM A
P
LAYLIST
E
LEMENT
It is possible to modify the IN or OUT point of a playlist element. To do so,
proceed as follows:
1. Open the Control Panel and assign a player channel to it.
2. Open a playlist in the Playlist Panel interface.
3. Drag an element from the playlist onto the Control Panel.
The element will then be loaded on the Control Panel. The association is
indicated by the Channel field which turns light purple in both Control Panel
and Playlist Panel windows.
4. Do one or both of the following possibilities:
• Define a new TC IN and press the Mark IN button.
• Define a new TC OUT and press the Mark OUT button.
5. Press the UPDATE ELEMENT button.
The element is modified in the playlist and the corresponding information is
updated both in the Control Panel and in the playlist.