Postscript passwords – Xerox WorkCentre 6400 User Manual
Page 76
Security
WorkCentre 6400 Multifunction Printer
System Administrator Guide
76
PostScript Passwords
The PostScript language includes commands that allow PostScript print jobs to change the printer’s
configuration. By default, this capability is allowed. To ensure that unauthorized changes are not made,
you can require PostScript jobs to include a password.
You can enable the following password:
•
Run Start Job: This password controls the execution of the Sys/Start file.
You can create the following passwords:
•
System Parameters Password: This password can be used to control the execution of PostScript
snippets.
•
Start Job Password: The Start Job password, used with the Startjob and Exitserver operators,
restricts PostScript jobs from running unencapsulated to prevent them from changing default
settings.
•
For more information on these passwords, see CentreWare IS help.
To enable or create these passwords:
Note:
If your printer is locked, you must log in as a system administrator. For details, see
1.
In CentreWare IS, click Properties > Security > PostScript
Passwords.
2.
Under Run Start Job, under Startup Mode, select Enabled to enable the Run Start job password
feature.
3.
Under System Parameters Password or Job Start Password, type a password.
4.
Retype the password to verify.
5.
Click Apply.