Taking the printer offline – Xerox WorkCentre 6400 User Manual
Page 154
Administrator Tools
WorkCentre 6400 Multifunction Printer
System Administrator Guide
154
Taking the Printer Offline
To prevent the printer from either sending or receiving jobs over the network at any given time, you can
take the printer offline. This allows you to perform printer maintenance without jobs being sent to the
printer. When the printer is offline, any services, such as Workflow Scanning, are unavailable.
Note:
If your printer is locked, you must log in as a system administrator. For details, see
Administrator Access at the Control Panel
1.
At the printer control panel, press the Machine Status button.
2.
Touch the Tools tab.
3.
Touch Network Settings.
4.
Touch Online/Offline.
5.
Touch Close.
6.
Press the Log In/Out button, then touch Logout to exit the Tools pathway.
Note:
Taking the printer offline does not cause the printer to power down or turn off.
Restarting the Printer in CentreWare IS
Note:
If your printer is locked, you must log in as a system administrator. For details, see
1.
In CentreWare IS, click Status > Description & Alerts.
2.
At the bottom of the page, click Reboot Machine then click OK.
Note:
Restarting the printer can take up to five minutes. During this time, network access is not
available.
Restarting the Printer from the Control Panel
Note:
If your printer is locked, you must log in as a system administrator. For details, see
Administrator Access at the Control Panel
1.
At the printer control panel, press the Machine Status button.
2.
Touch the Tools tab.
3.
Touch Troubleshooting.
4.
Touch Resets.
5.
Touch Software Reset.
6.
Under Reset Options, select the type of reset you want:
•
All Software
•
Network Software
•
Copy Software