Xerox WorkCentre 6400 - Manual (Page 59)

Security
WorkCentre 6400 Multifunction Printer
System Administrator Guide
59
Authentication Using a Card Reader System
Setting Up Authentication Using Xerox Secure Access
Before you begin:
•
Enable Secure HTTP (SSL). For details, see Enabling HTTP on page 43.
• Enable the Authentication & Authorization Configuration Web Service. For details, see
Authentication on page 54.
• Install the Xerox Secure Access authentication server and configure with user accounts. Refer to
the authentication server documentation for help.
Note: Accounts created on the Xerox Secure Access authentication server must match accounts
stored in the printer’s local database or in another network authentication server.
• Connect and configure your card reader.
To configure authentication using Xerox Secure Access:
Note: If your printer is locked, you must log in as a system administrator. For details, see Accessing
CentreWare IS on page 17.
1. In CentreWare IS, click Properties > Security > Access Rights > Setup. The Step 1 of 3 window
displays.
2. If this is the first time you have configured authentication, click Next otherwise, click Edit
Methods.
3. Under Device User Interface Authentication, select Xerox Secure Access.
4. Under Web User Interface Authentication, select Locally on the Device (Internal Database) or
Remotely on the Network to specify how the printer will validate the user's rights to access
CentreWare IS.
5. If a user normally authenticates at the control panel with a card reader, you must specify a
method for the printer to authenticate users who access CentreWare IS from their computer. If
you select Remotely on the Network, you must configure a network authentication server.
6. Under Authorization, select Locally on the Device (Internal Database), or Remotely on the
Network.
7. Click Next.
8. Click Configure next to Device User Interface Authentication.
9. Configure the Remote Server. For instructions, refer to the information provided with your server
hardware.
After the server is configured, the server communicates with the printer and automatically
completes the configuration process.
10. If required, click Manually Configure to manually configure communication, personalize
instructional windows, and review accounting options. For details, see Manually Configuring
Control Panel Authentication on page 60.
11. If you selected Remotely on the Network for the Web User Interface Authentication method,
click Configure next to Web User Interface Authentication. Configure the authentication server
settings. For details, see
Network Authentication on page 56.
12. Click Finish.