Yamaha 006IPTO-F0 - Manual (Page 97)

Setting Aux Out 1–8 from the Display
97
DM1000 Version 2—Owner’s Manual
8
Aux Sends
■ Viewing Faders and On/Off Parameters
To display the View | Fader page, use the corresponding [SEL] button or fader to select the
desired Aux Out (1–8), then press the DISPLAY ACCESS [VIEW] button, then the [F2] but-
ton.
• ON/OFF.........................This button turns the currently-selected Aux Out (1–8) on or
off. It links with the corresponding [ON] (1–8) button in the
Master layer.
• Fader ..............................This fader sets the currently-selected Aux Out (1–8) level. It
links with the corresponding fader (1–8) in the Master layer.
The fader knob is highlighted when the fader is set to 0.0dB.