Yamaha 006IPTO-F0 - Manual (Page 132)

132
Chapter 11—Surround Functions
DM1000 Version 2—Owner’s Manual
E LFE
This parameter control sets the level of the LFE (Low Frequency Effects) Channel signal
routed to the subwoofer, and appears only in 5.1 and 6.1 Surround modes.
F DIV
This parameter control determines how the Center signal is fed to the Left, Right, and
Center channels. It is expressed as a percentage ranging from 0 to 100%. When you set
the parameter to 100, the Center signal is fed to only the Center channel. When you set
the parameter to 0, the Center signal is fed to only the Left and Right channels. When
you set the parameter to 50, the Center signal is fed equally to the Left, Right, and Center
channels. This parameter control appears only in 3-1 and 5.1 Surround modes.
6 F & R
In 6.1 Surround mode, F and R parameter controls appear, instead of the DIV control.
The F parameter control determines how the Front Center signal is fed to the Left and
Right channels, and the R parameter control determines how the rear surround signal
is fed to the Left and Right surround channels.
G LINK
This button is available only in 6.1 Surround mode. When you turn on this button, the
F and R controls are set to the same value, and linked together.
H ST LINK
Turning on this button links the surround pan parameters of two Input Channels that
are currently displayed on the page (Stereo Link function). You can link the surround
pan parameters of two channels regardless of whether they are paired.
I PATTERN
When Input Channels are linked by the Stereo Link function, the seven patterns select-
able here determine how the linked surround pan moves via the Parameter wheel and
the [INC]/[DEC] buttons.
3 Select one of seven trajectory patterns by turning on the corresponding tra-
jectory pattern button.
The following patterns are available:
• ...................... The sound image moves between left and right.
Tip: In 3-1, 5.1, and 6.1 Surround modes, operating the Joystick locates the Pan/Surr |
Ch Edit page.
40 56 36 40