Yamaha 006IPTO-F0 - Manual (Page 68)

68
Chapter 6—Input Channels
DM1000 Version 2—Owner’s Manual
EQ’ing Input Channels
The DM1000’s Input Channels feature 4-band (LOW, LOW-MID, HIGH-MID, HIGH)
parametric EQ. The LOW-MID and HIGH-MID bands are a peaking type of EQ. The LOW
and HIGH bands can be set to shelving, peaking, or HPF and LPF respectively.
1 Press the [SEL] button or move the fader of the channel for which you wish
to adjust EQ.
2 Press the SELECTED CHANNEL EQUALIZER [DISPLAY] button repeatedly to
display the EQ | EQ Edit page.
The parameters on this page are described below:
A EQ ON
The ON/OFF button turns the currently-selected Input Channel’s EQ on or off. You can
press the [ENTER] button to turn the EQ on or off as long as the cursor is located on
any parameter other than TYPE.
B TYPE
Selects the type of EQ. TYPE I is the EQ type used on legacy Yamaha 02R series digital
mixing consoles. TYPE II is a newly developed algorithm.
C ATT
Determines the amount of pre-EQ signal attenuation in dB. It is the same Attenuator
parameter that appears on the EQ | ATT 1-16, ATT 17-32, and ATT 33-48 pages.
D CURVE
This area displays the current EQ curve.
E Meters
These meters indicate the post-EQ signal levels of the currently-selected Input Channel
and its available pair partner.
5
1
4 3 2
6