Yamaha 006IPTO-F0 - Manual (Page 100)

100
Chapter 8—Aux Sends
DM1000 Version 2—Owner’s Manual
3 Move the cursor to the FIXED or VARIABLE button in the MODE section for
the currently-selected Aux Send to select a mode.
• Fixed Mode
In this mode, Aux Send levels are fixed at nominal (0.0dB). Also, channel ON/OFF buttons
appear instead of the Send level rotary controls and PRE/POST buttons.
• Variable Mode
In this mode, Aux Send levels are variable and the signal source point can be either pre-fader
or post-fader. Channel Send level rotary controls and PRE/POST buttons appear on the
screen.
Tip: You can select Variable or Fixed mode individually for each of the eight Aux Sends.
Note:
• In Fixed mode, all ON/OFF buttons are turned OFF.
• When you switch to Variable mode, the signal source points are set to post-fader (PRE/POST
buttons are set to POST), and Send level rotary controls are reset to –
∞.