Yamaha 006IPTO-F0 - Manual (Page 213)

Editing Events Offline
213
DM1000 Version 2—Owner’s Manual
Automix
16
3 To duplicate or delete events, select an event by moving the triangular icon
(® ® ® ® ) to the event in the list, then select the DUPLICATE or DELETE button.
4 To modify the event time, channel or parameter value, move the cursor to
a parameter value you wish to change, then rotate the Parameter wheel or
press the [INC]/[DEC] buttons.
5 To locate an event, play the Automix and move the cursor to the CAPTURE
button, then press [ENTER].
The current position is captured and indicated in the Capture memory display.
6 To recall the event at the captured position, move the cursor to the LOCATE
button, then press [ENTER].
The event at (or closest to) the captured position is displayed and selected in the event list.
7 To insert a new event, use the Event select buttons to select the type of event
that you want to insert. Use the Capture memory display to specify the point
at which you want to insert the new event. Move the cursor to the INSERT
button, then press [ENTER].
The new event is inserted at the position currently displayed in the Capture memory dis-
play.
Tip:
• To modify the captured position, move the cursor to the Capture memory display, then rotate
the Parameter wheel or press the [INC]/[DEC] buttons. Press the [ENTER] button to reset
the currently-selected digit to “00.”
• Up to eight timecode values can be captured in the Capture memories. To recall another
Capture memory, move the cursor to the parameter box located to the left of the CAPTURE
button, then select the desired Capture memory number (1–8).