beautypg.com

Nuendo/cubase sx remote layer, Other daw remote layers – Yamaha 006IPTO-F0 User Manual

Page 235

background image

Nuendo/Cubase SX Remote Layer

235

DM1000 Version 2—Owner’s Manual

Remote Control

17

Nuendo/Cubase SX Remote Layer

You can remotely control Nuendo and Cubase SX using Remote Layers 1 and 2.

Configuring Computers

1 Connect the DM1000 to your computer using a USB cable, and install the

required USB driver included on the DM1000 CD-ROM.

Refer to the Studio Manager installation guide for more information on installing the
driver.

2 Launch Nuendo/Cubase SX, select the Device Setup menu, and set up

Nuendo/Cubase SX so that the DM1000 can communicate with the soft-
ware.

Refer to the Nuendo/Cubase SX User’s Manual for more information on setting up the soft-
ware.

Configuring the DM1000

1 Refer to page 218 to configure the Setup | MIDI/HOST page.

2 Press the LAYER [REMOTE 1] or [REMOTE 2] button to set the TARGET param-

eter to Nuendo/Cubase SX.

You can now remotely control Nuendo/Cubase SX using the selected Remote Layer.

Other DAW Remote Layers

You can remotely control DAW software that supports the Pro Tools protocol.

Configuring Computers

1 Connect the DM1000 to your computer using a USB cable, and install the

required USB driver included on the DM1000 CD-ROM.

Refer to the Studio Manager installation guide for more information on installing the
driver.

2 Launch and set up DAW software so that the DM1000 communicates with

the software.

Refer to the DAW software’s user’s manual for more information on setting up the software.

Configuring the DM1000

1 Refer to page 218 to configure the Setup | MIDI/HOST page.

2 Press the LAYER [REMOTE 1] or [REMOTE 2] button to set the TARGET param-

eter to General DAW.

You can now remotely control DAW software using the selected Remote Layer.

This manual is related to the following products: