3 operating basics, About the display, Operating basics – Yamaha 006IPTO-F0 User Manual
Page 29
Operating Basics
29
DM1000 Version 2—Owner’s Manual
3
Operating Basics
3 Operating Basics
This chapter describes basic operations on the DM1000, including how to use the display
and operate the controls on the top panel.
About the Display
The top panel display indicates various parameters that you must set before you can operate
the DM1000. The display indicates the following items:
A
Selected DISPLAY
This section indicates the currently-selected display page group.
B
Selected channel
This section indicates the Input or Output Channel currently selected by its correspond-
ing [SEL] button or fader. The first four characters are the Channel ID (e.g.,
CH1–CH48, BUS1–BUS8, AUX1–AUX8, ST-L, ST-R). The second four characters are
the channel’s Short name. You can edit the channel’s Short name if you desire (see
page 79 and 91).
C
Current Scene
This section indicates the number and title of the currently-selected Scene memory (see
page 164). If the selected Scene is write-protected, a padlock icon (
) appears.
D
EDIT indicator
This indicator appears when the current mix settings no longer match those of the Scene
that was most-currently recalled. It works in unison with the Edit indicator dot on the
Scene Memory display.
E
ESAM indicator
This indicator appears when you select ESAM for the REMOTE FUNCTION parameter
on the Setup | Remote page (see page 260).
1
2
J
N
M
K
L
4
6
9