Yamaha 006IPTO-F0 - Manual (Page 182)

182
Chapter 15—Libraries
DM1000 Version 2—Owner’s Manual
A CURRENT TYPE
This parameter displays the currently-selected channel gate type (Gate or Ducking).
B CURRENT CURVE
This graph displays the current channel gate curve.
C GR meters
These meters indicate the amount of gain reduction being applied by the gate, and the
post-gate levels of the currently-selected channel and its available pair partner.
D Type & Curve section
The type (Gate or Ducking) and curve of the currently-selected memory is displayed
here.
2 Use the LAYER buttons to select layers, then press the [SEL] buttons to select
channels.
You can now store the selected channel gate settings or recall the gate library memories to
channels. For details on storing and recalling memories, see “General Library Operation”
on page 173.
The following table lists the preset memories in the Gate library:
Compressor Library
This library enables you to store and recall settings for the compressors on Input Channels,
Bus Outs 1–8, Aux Outs 1–8, and Stereo Out. The library contains 36 preset memories and
92 user (readable & writable) memories.
Follow the steps below to use the Compressor library.
1 Press the DISPLAY ACCESS [DYNAMICS] button, then press the [F4] button.
The Dynamics | Comp Lib page appears.
Tip: If you selected an Aux Out (1–8), Bus Out (1–8), or Stereo Out that does not feature
a gate, the DM1000 indicates “XXX HAS NO GATE!” (in which XXX represents a signal
name).
No. Preset Name Type Description
1 Gate GATE Gate template
2 Ducking DUCKING Ducking template
3 A. Dr. BD GATE Gate preset for use with acoustic bass drums
4 A. Dr. SN GATE Gate preset for use with acoustic snare drums
1
3
4
2