Yamaha 006IPTO-F0 - Manual (Page 101)

Setting Aux Send Levels
101
DM1000 Version 2—Owner’s Manual
8
Aux Sends
4 If you switched to Fixed mode in Step 3, the ON/OFF buttons turn on or off
each Input Channel on or off for the currently-selected Aux Send.
5 If you switched to Variable mode in Step 3, the PRE/POST buttons and Send
level rotary controls enable you to adjust the signal source points and Send
levels.
You can turn each Input Channel on or off for the currently-selected Aux Send even in Vari-
able mode. To do this, move the cursor to the desired Send level control, then press
[ENTER]. (The rotary controls for Off channels are grayed out.)
Note: In Fixed mode, the Aux On/Off parameters for paired Input Channels are not linked
to each other.
Tip:
• In Variable mode, Aux Send levels, Aux On/Off, and Pre/Post parameters for paired Input
Channels are linked to each other.
• GLOBAL PRE/POST buttons enable you to set all Input Channels simultaneously (includ-
ing those not displayed on the current page) to pre-fader or post-fader.