Yamaha 006IPTO-F0 - Manual (Page 198)

198
Chapter 16—Automix
DM1000 Version 2—Owner’s Manual
5 Perform the following operations to punch in and out individual events.
6 Stop the Automix.
A confirmation window regarding updating the Automix data appears.
Parameters Channel OVERWRITE Operation Punch In Punch Out
Channel Levels
(faders)
Input
FADER
Set Layer to Iinput,
Fader mode to Fader
Touch fader knob
and adjust
1
1. To punch in events by performing this operation, set TOUCH SENSE to TOUCH or LATCH on the Fader1 or 2 page.
Release fader knob 2
2. To punch out events by performing this operation, set TOUCH SENSE to TOUCH on the Fader1 or 2 page.
Bus Out,
Aux Send Set Layer to Master,
Fader mode to fader
Stereo Out Stereo Out fader
Group Mas-
ter Fader
Set Fader mode to
fader. Set Group Mas-
ter in User Assign-
able Layer.
Pan Input PAN
Set Layer to Input,
Encoder mode to Pan Press Encoder and
adjust
Press Encoder
Surround Pan Input SURR
Select Input Layer
and assign Surround
LFE Level or Surround
Pan Wheel to the
Encoders
Press Encoder and
adjust
Press Encoder
EQ (F, Q, G)
All channels EQ
Use SELECTED
CHANNEL EQUAL-
IZER section. (If EQ
parameter assigned
to an Encoder, also
use Encoders.) Adjust SELECTED
CHANNEL control
3
Press Encoder and
adjust
3. To punch in events by performing this operation, turn on the Auto EQ Edit preference.
Press [SEL] button
EQ On/Off
Press Encoder and
adjust
4
4. To punch in events by performing this operation, assign EQ parameters to the Encoders.
Press Encoder
Aux Sends 1–8 Level Input AUX
Set Layer to Input,
Fader mode to Aux Touch fader knob
and adjust
1
Release fader knob 2
Set Layer to Input,
Encoder mode to Aux Press Encoder and
adjust
Press Encoder
Effects parameters
(certain
parameters)
Effects pro-
cessors 1–4
—
Select internal effects
processors
Move the cursor to
the parameter con-
trol on the page,
then press [ENTER]. Move the cursor to
the parameter con-
trol on the page,
then press [ENTER].
User Defined
Remote Layer
Faders FADER
Select User Defined
Remote Layer Touch fader knob
and adjust
1
Release fader knob 2
Encoders PAN
Select User Defined
Remote Layer Press Encoder and
adjust
Press Encoder