Media bandwidth management setup 2, 3 media bandwidth management setup 2 – ZyXEL Communications P-334W User Manual
Page 66

Prestige 334W User’s Guide
4-2
Bandwidth Management Setup
Table 4-1 Media Bandwidth Management Setup 1
LABEL
DESCRIPTION
Active
Select the Active check box to have the Prestige apply bandwidth management
to traffic going out through the Prestige’s WAN, LAN or WLAN port.
Managed Bandwidth
(Kbps)
Enter the amount of Managed Bandwidth in kbps (2 to 100,000) that you want
to allocate for traffic. 20 kbps to 20,000 kbps is recommended. The
recommendation is to set this speed to be equal to or less than the speed of the
broadband device connected to the WAN port.
For example, set the speed to 1000 Kbps (or less) if the broadband device
connected to the WAN port has an upstream speed of 1000 Kbps.
Next
Click Next to continue.
4.3 Media Bandwidth Management Setup 2
Use the second wizard screen to select the services that you want to apply bandwidth management.
Figure 4-2 Media Bandwidth Management Setup 2: Services
The following table describes the fields in this screen.