ZyXEL Communications P-334W - Manual (Page 302)

Prestige 334W User’s Guide
23-6 Menu 3 LAN Setup
Table 23-3 Menu 3.2.1: IP Alias Setup
FIELD DESCRIPTION EXAMPLE
IP Alias 1, 2 Choose Yes to configure the LAN network for the Prestige. Yes
IP Address Enter the IP address of your Prestige in dotted decimal notation. 192.168.1.1
IP Subnet Mask Your Prestige will automatically calculate the subnet mask based on
the IP address that you assign. Unless you are implementing
subnetting, use the subnet mask computed by the Prestige. 255.255.255.0
RIP Direction Press [SPACE BAR] and then [ENTER] to select the RIP direction.
Options are
Both, In Only, Out Only or None. None
Version Press [SPACE BAR] and then [ENTER] to select the RIP version.
Options are
RIP-1, RIP-2B or RIP-2M.
RIP-1
Incoming Protocol
Filters Enter the filter set(s) you wish to apply to the incoming traffic
between this node and the Prestige. 1
Outgoing Protocol
Filters Enter the filter set(s) you wish to apply to the outgoing traffic
between this node and the Prestige. 2
When you have completed this menu, press [ENTER] at the prompt [Press ENTER to Confirm…] to save
your configuration, or press [ESC] at any time to cancel.
23.4 Wireless LAN Setup
Use menu 3.5 to set up your Prestige as the wireless access point. To edit menu 3.5, enter 3 from the main
menu to display Menu 3 – LAN Setup. When menu 3 appears, press 5 and then press [ENTER] to display
Menu 3.5 – Wireless LAN Setup as shown next.