ZyXEL Communications P-334W User Manual
Page 52
Prestige 334W User’s Guide
3-4
Wizard
Setup
Figure 3-3 Wizard 3: Wireless LAN Setup: Basic Security
The following table describes the labels in this screen.
Table 3-2 Wizard 3: Wireless LAN Setup: Basic Security
WEP
Encryption
Select 64-bit WEP or 128-bit WEP to allow data encryption.
ASCII
Select this option in order to enter ASCII characters as the WEP keys.
HEX
Select this option to enter hexadecimal characters as the WEP keys.
The preceding “0x” is entered automatically.
Key 1 to Key 4
The WEP keys are used to encrypt data. Both the Prestige and the wireless stations must
use the same WEP key for data transmission.
If you chose 64-bit WEP, then enter any 5 ASCII characters or 10 hexadecimal characters
("0-9", "A-F").
If you chose 128-bit WEP, then enter 13 ASCII characters or 26 hexadecimal characters
("0-9", "A-F").
You must configure all four keys, but only one key can be activated at any one time. The
default key is key 1.
Back
Click Back to display the previous screen.
Next
Click Next to proceed to the next screen.