ZyXEL Communications P-334W - Manual (Page 266)

Prestige 334W User’s Guide
18-12 Media Bandwidth Management
Table 18-5 Bandwidth Management Edit
LABEL DESCRIPTION
Active Select this check box to have the Prestige apply this bandwidth management rule.
Enable a bandwidth management rule to give traffic that matches the rule priority over
traffic that does not match the rule.
Rule Name Use the auto-generated name or enter a descriptive name of up to 20 alphanumeric
characters, including spaces.
BW Budget Specify the maximum bandwidth allowed for the rule in kbps. The recommendation is a
setting between 20 kbps and 20000 kbps for an individual rule.
Priority Select a priority from the drop down list box. Choose High, Mid or Low. The higher the
number, the higher the priority.
Use All Managed
Bandwidth Select this option to allow a rule to borrow unused bandwidth on the interface.
Bandwidth borrowing is governed by the priority of the rules. That is, a rule with the
highest priority is the first to borrow bandwidth. Do not select this if you want to leave
bandwidth available for other traffic types or if you want to restrict the amount of
bandwidth that can be used for the traffic that matches this rule.
Service Select a service for your rule or you can define your own.
Destination Address Enter the destination IP address in dotted decimal notation.
Destination Subnet
Netmask Enter the destination subnet mask. This field is N/A if you do not specify a Destination
IP Address. Refer to the appendices for more information on IP subnetting.
Destination Port Enter the port number of the destination. See Table 18-3 for some common services and
port numbers.
Source Address Enter the source IP address in dotted decimal notation.
Source Subnet
Netmask Enter the destination subnet mask. This field is N/A if you do not specify a Source IP
Address. Refer to the appendices for more information on IP subnetting.
Source Port Enter the port number of the source. See Table 18-3 for some common services and
port numbers.