ZyXEL Communications P-334W - Manual (Page 454)

Prestige 334W User’s Guide
C-2 NetBIOS Filter Commands
Table C-1 NetBIOS Filter Default Settings
NAME DESCRIPTION EXAMPLE
Between LAN
and WAN This field displays whether NetBIOS packets are blocked or
forwarded from the LAN to the WAN or from the WAN to the LAN. Forward
IPSec Packets This field displays whether NetBIOS packets sent through a VPN
connection are blocked or forwarded. Forward
Trigger dial This field displays whether NetBIOS packets are allowed to initiate
calls. Disabled means that NetBIOS packets are blocked from
initiating calls. Disabled
NetBIOS Filter Configuration
Syntax: sys filter netbios config
where
= Identify which NetBIOS filter (numbered 0-3) to configure.
0 = LAN to WAN and WAN to LAN
3 = IPSec Packets
4 = Trigger dial
= For type 0, use on to enable the filter and block NetBIOS packets. Use
off to disable the filter and forward NetBIOS packets.
For type 3, use on to block NetBIOS packets from being sent through a
VPN connection. Use off to allow NetBIOS packets to be sent through
a VPN connection.
For type 4, use on to allow NetBIOS packets to initiate dial backup
calls. Use off to block NetBIOS packets from initiating dial backup
calls.
Example commands
Command: sys filter netbios config 0 on
This command blocks LAN to WAN and WAN to LAN NetBIOS packets
Command: sys filter netbios config 3 on
This command blocks IPSec NetBIOS packets