ZyXEL Communications P-334W - Manual (Page 382)

Prestige 334W User’s Guide
32-4 System Security
Figure 32-5 Menu 23.4 System Security : IEEE802.1x
The following table describes the fields in this menu.
Table 32-2 Menu 23.4 System Security : IEEE802.1x
FIELD DESCRIPTION
Wireless Port
Control Press [SPACE BAR] and select a security mode for the wireless LAN access.
Select No Authentication Required to allow any wireless stations access to your
wired network without entering usernames and passwords. This is the default setting.
Selecting Authentication Required means wireless stations have to enter usernames
and passwords before access to the wired network is allowed.
Select No Access Allowed to block all wireless stations access to the wired network.
The following fields are not available when you select No Authentication Required or
No Access Allowed.
ReAuthentica-
tion Timer
(in second) Specify how often a client has to re-enter username and password to stay connected to
the wired network.
This field is activated only when you select Authentication Required in the Wireless
Port Control field. Enter a time interval between 10 and 9999 (in seconds). The default
time interval is 1800 seconds (or 30 minutes).
Menu 23.4 - System Security - IEEE802.1x
Wireless Port Control= No Authentication Required
ReAuthentication Timer (in second)= 1800
Idle Timeout (in second)= 3600
Key Management Protocol= Local User Database Only
Dynamic WEP Key Exchange= 64-bit WEP
PSK = N/A
WPA Mixed Mode= N/A
Data Privacy for Broadcast/Multicast packets= N/A
WPA Broadcast/Multicast Key Update Timer= N/A
Authentication Databases= N/A
Press ENTER to Confirm or ESC to Cancel: