ZyXEL Communications P-334W - Manual (Page 250)

Prestige 334W User’s Guide
17-2 Centralized Logs
Table 17-1 View Logs
LABEL DESCRIPTION
Display The categories that you select in the Log Settings page (see section 17.2) display in the
drop-down list box.
Select a category of logs to view; select All Logs to view logs from all of the log
categories that you selected in the Log Settings page.
Time This field displays the time the log was recorded. See the chapter on system
maintenance and information to configure the Prestige’s time and date.
Message This field states the reason for the log.
Source This field lists the source IP address and the port number of the incoming packet.
Destination This field lists the destination IP address and the port number of the incoming packet.
Note This field displays additional information about the log entry.
Email Log Now Click Email Log Now to send the log screen to the e-mail address specified in the Log
Settings page (make sure that you have first filled in the Address Info fields in Log
Settings, see section 17.2).
Refresh Click Refresh to renew the log screen.
Clear Log Click Clear Log to delete all the logs.
17.2 Log Settings
You can configure the Prestige’s general log settings in one location.
Click the LOGS in the navigation panel and then the Log Settings tab to open the Log Settings screen.
Use the Log Settings screen to configure to where the Prestige is to send logs; the schedule for when the
Prestige is to send the logs and which logs and/or immediate alerts the Prestige to send.
An alert is a type of log that warrants more serious attention. They include system errors, attacks (access
control) and attempted access to blocked web sites or web sites with restricted web features such as cookies,
active X and so on. Some categories such as System Errors consist of both logs and alerts. You may
differentiate them by their color in the View Log screen. Alerts display in red and logs display in black.
Alerts are e-mailed as soon as they happen. Logs may be e-mailed as soon as the log is full (see Log
Schedule). Selecting many alert and/or log categories (especially Access Control) may result in many e-
mails being sent