ZyXEL Communications P-334W - Manual (Page 324)

Prestige 334W User’s Guide
25-10 Remote Node Configuration
Figure 25-6 Menu 11.5: Remote Node Filter (PPPoE or PPTP Encapsulation)
25.4.1 Traffic Redirect Setup
Configure parameters that determine when the Prestige will forward WAN traffic to the backup gateway
using Menu 11.6 — Traffic Redirect Setup.
Figure 25-7 Menu 11.6: Traffic Redirect Setup
The following table describes the fields in this screen.
Table 25-5 Menu 11.6: Traffic Redirect Setup
FIELD DESCRIPTION EXAMPLE
Active Press [SPACE BAR] and select Yes (to enable) or No (to disable) traffic
redirect setup. The default is No. Yes
Menu 11.5 - Remote Node Filter
Input Filter Sets:
protocol filters=
device filters=
Output Filter Sets:
protocol filters=
device filters=
Call Filter Sets:
protocol filters=
device filters=
Enter here to CONFIRM or ESC to CANCEL:
Menu 11.6 - Traffic Redirect Setup
Active= Yes
Configuration:
Backup Gateway IP Address= 0.0.0.0
Metric= 14
Check WAN IP Address= 0.0.0.0
Fail Tolerance= 2
Period(sec)= 5
Timeout(sec)= 3
Press ENTER to Confirm or ESC to Cancel: